Ressourcen · 11
Identitäts- und Kontowiederherstellung: regeln den gesamten Lebenszyklus
Verbinden Sie Kontoerstellung, -änderung, -privilegien, -wiederherstellung und -schließung mit überprüfbaren Beweisen und einstudierten Entscheidungen.
Aktualisiert · 8 min
Wozu dieser Leitfaden beiträgt
- Verknüpfen Sie jedes Konto mit einer Person oder einem Dienst
- Dauerprivileg reduzieren
- Wiederherstellungsanfragen schützen
- Schnell widerrufen, ohne die Kontinuität zu verlieren
Kurzcheck
- Wer genehmigt die Erstellung und Rollenänderung?
- Kann ein alter Faktor das Konto alleine zurücksetzen?
- Sind Shared-Account-Aktionen zurechenbar?
- Verfallen Privilegien?
- Wurde Telefonverlust ausgeübt?
Schritt-für-Schritt-Anleitung
- 1
Inventaridentitäten und -abhängigkeiten
Personen-, Dienst-, freigegebene, Verbund- und Notfallkonten auflisten. Verbinden Sie sie mit Anwendungen, Besitzern, Authentifizierungsmethoden und zugänglichen Daten.
Lieferinhalt: Identitäts-, Konto-, System- und Eigentümerregister.
- 2
Lebenszyklus mit Ereignissen verbinden
Definieren Sie Auslöser für Onboarding, Mobilität, Abwesenheit, Rollenwechsel, Austritt und Löschung. Messen Sie die Verzögerung zwischen dem Ereignis und der tatsächlichen Zugriffsänderung.
Liefergegenstand: Ereignis- und Aktionsmatrix.
- 3
Privileg reduzieren
Trennen Sie die tägliche Nutzung von der Verwaltung, begrenzen Sie die Dauer des erhöhten Zugriffs und überprüfen Sie die Berechtigungen entsprechend dem Servicerisiko.
Lieferinhalt: Rollenkatalog und datierte Ausnahmen.
- 4
Harden-Recovery
Nutzen Sie bei ungewöhnlichen Anfragen unabhängige Beweise, einen sicheren Kanal, eine angemessene Verzögerung und eine menschliche Eskalation.
Liefergegenstand: Wiederherstellungsentscheidungsbaum.
- 5
Bereiten Sie sich auf Verluste und Kompromisse vor
Planen Sie Sitzung, Faktor- und Gerätesperre, Service-Desk-Kommunikation, Fallback-Zugriff und anteilige Trace-Aufbewahrung.
Liefergegenstand: Lockout- und Recovery-Runbook.
- 6
Trainieren und verbessern Sie sich
Testen Sie eine dringende Abreise, einen Telefonverlust und einen Identitätsdiebstahlversuch. Beobachten Sie Entscheidungen, Zeitpunkt, Beweise und betriebliche Auswirkungen.
Liefergegenstand: Übungsbericht und Sanierungsplan.
Fiktives Arbeitsbeispiel
Beispielhafte Situation
Ein Administrator verliert während eines Anrufs ein Authentifizierungsgerät. Der Support prüft einen vorab vereinbarten Nachweis, holt eine zweite Genehmigung zur Wiederherstellung ein und macht betroffene Sitzungen ungültig.
Entscheidung und erwartete Beweise
Die Übung prüft die Servicekontinuität und behält die Anforderung, Genehmigung, den ersetzten Faktor und die Überprüfung nach dem Vorfall bei.
Managementindikatoren
| Indikator | Was es misst | Erste Aktion |
|---|---|---|
| Zugeordnete Konten | Konten, die mit einem aktiven Eigentümer verbunden sind | Behandeln Sie zuerst Konten ohne Besitzer |
| Sperrverzögerung | Zeit vom Ereignis bis zum Entfernen des Zugriffs | Automatisieren Sie zuverlässige Schritte |
| Temporäres Privileg | Erhöhter Zugriff mit Dauer und Begründung | Berechtigung standardmäßig ablaufen lassen |
| Verifizierte Wiederherstellung | Anfragen nach jedem erwarteten Beweis | Überprüfen Sie jeden Bypass |
Häufige Fallstricke
- Persönliche Fragen als starke Beweise behandeln
- Support kann MFA ohne Vier-Augen-Prinzip umgehen
- Dienstkonten vergessen
- Berechtigung nach einer Zuweisung behalten
Häufig gestellte Fragen
Reicht MFA aus?
Nein. Es reduziert einige Risiken, aber Lebenszyklus, Wiederherstellung, Sitzungen und Berechtigungen können weiterhin angreifbar bleiben.
Sollte jeder geteilte Account verboten werden?
Bevorzugen Sie individuelle Identitäten. Wenn ein gemeinsames Konto weiterhin erforderlich ist, dokumentieren Sie die Gründe dafür, schränken Sie es ein und machen Sie jede Nutzung zuordenbar.
Was sollte zuerst geübt werden?
Der Verlust des Primärfaktors und der dringende Abgang einer hochprivilegierten Person offenbaren schnell reale Abhängigkeiten.
Identität: Faktoren, Sitzungen und Wiederherstellung
Ausführliche Hinweise stehen in dieser Ausgabe auf Englisch zur Verfügung.
An authentication method must be assessed alongside enrolment, recovery and the sessions it opens. A passkey label, a phone or a biometric sensor does not by itself establish the assurance level of the entire service.
References use NIST SP 800-63B-4, finalised in July 2025, and WebAuthn Level 3, a W3C Recommendation since 25 August 2026. AALs describe authentication transactions rather than product scores or certifications earned by ticking this table. Application depends on service scope and risk assessment.
Sources consulted on .
Compare eight methods without confusing their guarantees
| Method and reference | Property and conditions | Recovery and dependencies | Evidence to request |
|---|---|---|---|
| Entered password | Knowledge factor; a false site can relay or capture the secret. | Depends on the password manager and the password replacement path. | Length policy, compromised-secret blocking and a tested replacement journey. |
| Manually entered TOTP | Possession of a shared secret; manual entry does not bind the output to the legitimate session. | Plan for loss of the generator and protection of seeds or provider backups. | Authorised enrolment, secret protection and revocation; do not call every OTP phishing-resistant. |
| SMS or voice code | PSTN out-of-band channel, restricted in the NIST framework; manual codes are not phishing-resistant. | The number, carrier and SIM or line changes are dependencies. | Channel justification, risk signals, alternatives and number-change procedure. |
| Simple push approval | Approval without cryptographic verifier-name or channel binding does not establish phishing resistance. | Lost phones and application re-enrolment require handling. | Actual protocol, user intent and enrolment controls; the push label alone is insufficient. |
| Syncable WebAuthn with UV | Cryptographic binding to the service; user verification (UV) must be requested and checked when required. Syncable keys are exportable in NIST terminology. | The sync account, its devices and its recovery enter the trust boundary. | Sync and UV requirements. Syncable methods do not fit AAL3, which prohibits key export. |
| Device-bound WebAuthn with UV | Service binding and user verification. Device-bound alone does not establish non-exportable hardware protection. | Device loss requires another authorised method or controlled recovery. | Storage properties, UV, proof of non-exportability when needed and tests of actual clients. |
| WebAuthn key without UV | Service binding, but possession alone in this case. A touch or user presence (UP) flag is not proof of user verification (UV). | Plan a second authorised method and lost-key revocation. | UP/UV checks and the factor combination required by the service; hardware form alone does not establish MFA. |
| Biometrics considered alone | In the NIST framework, biometrics accompany a physical authenticator in MFA; they are neither secrets nor sufficient standalone mechanisms. | Provide a non-biometric alternative and protect biometric information appropriately. | Comparison location, activation role and accessible alternative; distinguish biometric comparison from cryptographic proof. |
No method matches the filters.
Three AALs: distinguish requirements and recommendations
| Level and factors | Resistance and key export | Overall reauthentication timeout | Inactivity |
|---|---|---|---|
| AAL1 One factor can suffice at this level. | Phishing resistance not imposed by this level; key export permitted. | At most 30 days: SHOULD recommendation. | No numeric ceiling in this reference; define the service policy. |
| AAL2 Two distinct factors. | A phishing-resistant option must be offered; key export permitted under applicable conditions. | At most 24 hours: SHOULD recommendation; establishing a definite overall limit remains mandatory. | At most 1 hour: SHOULD recommendation. |
| AAL3 Cryptographic authenticator and additional or activation factor. | Phishing resistance and a non-exportable private key required. | At most 12 hours: SHALL requirement. | At most 15 minutes: SHOULD recommendation. |
These values are not cookie lifetimes to copy blindly. NIST distinguishes overall and inactivity limits and then defines reauthentication rules. Applications may choose shorter periods based on risk. IAL concerns identity proofing and FAL federation: AAL does not replace either dimension. NIST §2 →
Passwords: seven precise NIST reference points
- Single factor
- Minimum 15 characters required.
- Within MFA
- Minimum 8 characters required when the password is used only in a multifactor process.
- Accepted length
- Allowing a maximum length of at least 64 characters is recommended.
- Composition
- No imposed mixture of character types.
- Replacement
- No arbitrary periodic changes; force a change when there is evidence of compromise.
- Secrets to reject
- Compare against commonly used, expected or compromised passwords.
- Entry assistance
- Allow password managers and autofill; permitting paste is recommended.
Recovery: four classes and their conditions
- Previously saved code
- At least 64 random bits in the NIST framework; offline subscriber storage, hashed server storage and invalidation after use.
- Code issued on demand
- Codes sent by text or voice are valid for at most 10 minutes; email codes for at most 24 hours. Verify addresses and apply the target level’s conditions.
- Recovery contact
- Organise contact addresses and associated checks; a personal relationship does not replace technical recovery requirements.
- Repeated identity proofing
- An option for previously identity-proofed accounts. Without prior identity proofing, do not claim to re-verify an unknown identity.
Replacing a forgotten password through another still-valid authenticator is binding a new authenticator rather than necessarily account recovery. Document notifications, delays, revocations and responsibilities so support does not become a bypass. NIST §4 →
Connect authentication, sessions and incidents
| Stage | Proposed practical check | Observable evidence |
|---|---|---|
| Enrol | Check who authorises a new authenticator and notify the subscriber through a known path. | Record of binding, associated method and authorisation basis. |
| Authenticate | Check the protocol, expected domain and required factors before granting access. | Results on chosen clients, with presence and verification indicators separated. |
| Manage the session | Define overall expiry, inactivity, reauthentication for sensitive actions and logout invalidation. | Expired-session, logout and post-revocation access tests. |
| Report loss | Identify the affected authenticator, preserve useful evidence and decide invalidation based on suspected compromise. | Report timeline and observed access result after handling. |
| Recover | Follow a documented path, notify and prevent an old session from adding a new method without appropriate checks. | Successful recovery case and refused bypass case. |
| Leave the service | Remove obsolete authenticators and access; address relevant sessions, devices and sync authorisations too. | Revoked methods, removed access and remaining dependencies. |
WebAuthn: verify the response at the service
The server must correlate the challenge, authorised origin, RP ID hash and signature with the expected ceremony and check required flags. UP signals presence; UV signals user verification. BE and BS describe credential backup eligibility and state without independently certifying the sync system. Use a maintained library and the complete procedures in specification sections 7.1 and 7.2. WebAuthn Level 3 →
Include people who use a different journey
WCAG 2.2 criterion 3.3.8, level AA, addresses cognitive tests during authentication with specific exceptions and assistance mechanisms. Test password managers, paste, labels, keyboard, cancellation and fallback in practice. NIST requires a non-biometric alternative; making it usable is part of design. WCAG 2.2 · 3.3.8 →
Continue with identity governance →
Primary references and scope
Publication and consultation dates are distinct. Proposed tests and evidence are editorial; linked normative texts govern. Vendor documentation describes its own product and does not establish your application’s AAL.
- NIST SP 800-63B-4 · final publication · Publication :
- NIST · Authentication Assurance Levels · Publication :
§2.1–2.3 - NIST · Authenticators and password requirements · Publication :
§3.1.1; §3.2.3; §3.2.5 - NIST · Authenticator Event Management · Publication :
§4.1; §4.2; §4.6 - NIST · Session Management · Publication :
§5 - NIST · Syncable Authenticators · Publication :
Appendix B - W3C · WebAuthn Level 3 · Publication : · W3C Recommendation
§6.1; §7.1–7.2 - W3C · Accessible Authentication (Minimum) · Publication :
WCAG 2.2 · 3.3.8 · AA
Erweiterungen: Berechtigungen und Zugriff
Ausführliche Hinweise stehen in dieser Ausgabe auf Englisch zur Verfügung.
Robust authentication does not describe extension access
Phishing resistance does not remove the need to examine what runs in the browser after a session opens. A manifest provides clues about cookies, scripting, debugging and identity without establishing collection.
- Test approved extensions in a profile dedicated to sensitive operations.
- For identity, inspect OAuth scopes and recipients; this permission does not enumerate identity-provider rights.
- Distinguish session revocation, token revocation, extension disablement and native-component removal.
Read the permission directory and manifest examples →
Google Chrome · Stay secure · Documentation consulted 2026-10-23; browser behaviour remains version-dependent
Offizielle Referenzen
Die Referenzen unterstützen die Methode. Passen Sie die Prüfungen an Ihren Kontext an; sie stellen keine Zertifizierung dar. Originalreferenztitel und Quelldokumente können in einer anderen Sprache verfasst sein.
Referenzen geprüft am .
- NIST — SP 800-63B, Authentication and Lifecycle Management
- NIST — Cybersecurity Framework 2.0
- NIST SP 800-63B-4 · final publication
- NIST · Authentication Assurance Levels
- NIST · Authenticators and password requirements
- NIST · Authenticator Event Management
- NIST · Session Management
- NIST · Syncable Authenticators
- W3C · WebAuthn Level 3
- W3C · Accessible Authentication (Minimum)
- Google Chrome · Declare permissions
- Google Chrome · Stay secure
