משאבים · 26

הרצת ניסוי A/B התומך בהחלטה מבוססת.

ציון השערה, הקצאה, מדד ראשי ומעקות בטיחות לפני השוואת וריאנטים.

מעודכן · 6 min

מעבדת מדידה בדיונית וריקה: שני מכשירים שחורים זהים, מנורת פליז ומחברת בורדו איור מערכתי שנוצר באמצעות בינה מלאכותית

מה מדריך זה עוזר להשיג

  • רישום מראש של הפרוטוקול
  • בדיקת הקצאה
  • מעקב אחר מעקות בטיחות
  • החלטה באי ודאות

בדיקה מהירה

  • איזו השערה מדויקת ניתן להפריך?
  • איזו יחידה מקבלת את הגרסה?
  • האם ההקצאה שנצפתה תואמת את התוכנית?
  • איזה נזק מצדיק השהייה?
  • האם משך הזמן והמקטעים נקבעו לפני שנצפו התוצאות?

שיטה שלב אחר שלב

  1. 1

    ציין את השינוי המוצע

    כתוב את המנגנון הצפוי, אוכלוסיית היעד וההשפעה על מדד עיקרי אחד. תאר סיכוני נגישות ושירות אפשריים.

    תוצר: השערה מתוארכת וקריטריונים להצלחה.

  2. 2

    הגדרת הקצאה

    בחר את יחידת האקראיות ושמור על הקצאה יציבה לאורך ביקורים. אי הכללת בוטים וציין מקטעים מחוץ לתחום לפני ההשקה.

    תוצר: פרוטוקול הקצאה והחרגות.

  3. 3

    מכשיר ובדיקה

    אימות אירועי חשיפה, המרה ומערכת בטיחות עבור שני הווריאנטים. בדיקת מצבי ניידות, סירוב הסכמה ושגיאה.

    תוצר: רישום אבטחת איכות של שני המסעות.

  4. 4

    בדיקת יחס דגימה

    השווה הקצאות שנצפו וצפויות לפני קריאת אפקט הטיפול. אי התאמה עשויה לחשוף פגמים בהקצאה, במדידה או במיקוד.

    תוצר: בדיקת יחס ואבחון פערים.

  5. 5

    ניתוח בזמן המתוכנן

    כבד את החלון שנבחר ודיווח על אי ודאות, מדד ראשוני, נזקים וניתוח מקטעים מתוכנן. בדיקת הפתעות מבלי לבחור רק את המספר החיובי לאחר מעשה.

    תוצר: ניתוח עם מגבלות ואי ודאות.

  6. 6

    החלטה ומעקב

    הקצאת בעלים לפריסה, נטישה או בדיקה אחרת. לאחר הפריסה, בדוק שהאפקט ומעקות הבטיחות נשארים עקביים.

    תוצר: החלטה מאוחסנת ובדיקה לאחר הפריסה.

מדדי ניהול

מדדמה הוא מודדפעולה ראשונה
הקצאהיחס דגימה צפוי לעומת יחס דגימה נצפהאבחון לפני ניתוח
חשיפהמשתמשים זכאים שנחשפו בפועלתיקון מיקוד
השפעהשינוי וחוסר ודאות במדד ראשוניהחלת כלל החלטה מתוכנן
מעקות בטיחותשגיאות, השהייה ונטישה לפי גרסההשהיית טיפול מזיק

טעויות נפוצות

  • עצירה כאשר מספר נראה חיובי לראשונה
  • איסוף מדדים רבים ללא מדד ראשוני
  • התעלמות מאי-התאמה ביחס דגימה
  • התייחסות לקטע זעיר כהוכחה כללית

שאלות נפוצות

האם יחס דגימה הוא פורמליות מינורית?

לא. אי-התאמה לא מוסברת יכולה להפוך את ההשוואה ללא אמינה.

האם יש לבדוק את ההמרה מדי יום?

ניטור תפעולי עוזר, אך שינוי משך הזמן או כלל ההחלטה בתגובה לתוצאות פוגע בפרשנות המתוכננת.

מה אם התוצאה אינה ודאית?

דווח על אי-ודאות וגודל אפקט סביר, ולאחר מכן החליט האם לניסוי אחר יש ערך ממשי.

הקצאת A/B: נתונים ו-SRM

הערות המקורות המפורטות זמינות באנגלית במהדורה זו.

A conversion difference becomes difficult to interpret when compared groups no longer match the assignment plan. Sample Ratio Mismatch (SRM) is a data quality signal: investigate allocation before evaluating the product change. This dossier connects calculation, instrumentation and decisions without treating a p-value as overall validation of an experiment.

In 2020 Microsoft Research describes four stages where SRM can arise and an ExP reference threshold p < 0.0005 using a chi-squared test. The educational CIE reader below uses a two-sided exact binomial test for two 50/50 groups. It does not reproduce ExP’s algorithm; the historical threshold is illustrative, not a universal standard.

Microsoft Research · Diagnosing Sample Ratio Mismatch · Published 2020-09-14 · consulted 2026-10-23

Four places to investigate a counting discrepancy

Four places to investigate a counting discrepancy
Stage documented by ExPCIE review questionOriginal practical investigation
AssignmentCheck the unit and rule that assign each participant.Replay the same identity across visits; compare configuration versions and change times. A reassigned unit no longer represents two independent observations.
ExecutionCompare what each variant actually allows to execute.Reproduce redirects, incomplete loading, errors and cancellation. Record when exposure is logged and whether the variant changes that moment.
Log processingReconcile inputs, exclusions and joins.Count units before and after each transformation. Check missing keys, duplicates, bot filters and telemetry loss by group.
AnalysisExamine the population retained for comparison.Compare the assigned population with the analysed subset. A filter triggered by an action available only in B selects a population affected by treatment.

Define what the two counts represent

Define what the two counts represent
Reader assumptionConsequence for interpretation
Two mutually exclusive variantsCount each unit once, in A or B. Repeated page views or events are not distinct participants.
Fixed 50/50 allocationEvery unit has the same probability of assignment to A and B. A 90/10 allocation, changing ratio or enforced quota needs a different model.
Independent trialsUnits linked through an organisation, household or reassignment can violate the binomial model. Choose the unit in the protocol.
Fixed window and filtersCompare the same interval and deduplication and eligibility rules. Do not adapt exclusions to obtain a desired result.
Bounded aggregate countsAccept 0 to 5,000 units per arm, at most 10,000 overall. This is an interface limit, not a minimum statistical power requirement.
Quality check onlyThe reader computes neither effect, conversion, power nor required sample size. A result without an SRM signal does not establish causality.

NIST/SEMATECH · Binomial distribution · e-Handbook §1.3.6.6.18 · consulted 2026-10-23

בדיקת הקצאה 50/50

Enter the two observed counts or load a fictional example. This checks allocation, not conversion counts. Calculation stays in the browser, without transmission, storage, import or export.

Under H₀, X follows Binomial(N, 0.5), with N = A + B and k = min(A, B). The reader computes p = min(1, 2 × Σᵢ₌₀ᵏ C(N,i) / 2ᴺ). This doubles the smaller tail, valid here by 50/50 symmetry. Sums are evaluated in logarithms to retain very small probabilities; displayed values are rounded.

A p-value describes how this allocation compares with the assumed model; it is not the probability that the experiment is valid or that a bug exists. A small value does not locate the cause. A large value does not establish error-free data. Repeated checks and multiple segments change false-alert control: define a suitable monitoring rule before operational use.

Eight educational examples readable without JavaScript

R01 · Two balanced groups
Two balanced groups
Count ACount BExpected reading
5050p = 1 under the model. This checks neither instrumentation, conversion nor causality.
R02 · 60/40 across ten units
60/40 across ten units
Count ACount BExpected reading
64p = 0.75390625. A visibly different ratio alone does not establish a signal at this small sample size.
R03 · Same ratio, hundredfold sample
Same ratio, hundredfold sample
Count ACount BExpected reading
600400The ratio remains 60/40, but the p-value becomes very small. Sample size changes statistical interpretation.
R04 · One empty arm, ten units
One empty arm, ten units
Count ACount BExpected reading
010p = 0.001953125 remains above the illustrative 0.0005 threshold. No alert at this threshold does not certify both arms are working.
R05 · One empty arm, twenty units
One empty arm, twenty units
Count ACount BExpected reading
020p = 0.0000019073486328125: a signal under the reference threshold. Investigate before interpreting an effect.
R06 · No observed units
No observed units
Count ACount BExpected reading
00No p-value: no observations. Show unavailable data rather than a reassuring result.
R07 · Extremely small probability
Extremely small probability
Count ACount BExpected reading
50001Displaying log₁₀(p) avoids presenting numerical rounding to zero as a mathematical impossibility.
R08 · Leading space is not repaired
Leading space is not repaired
Count ACount BExpected reading
5050Input rejected. The reader accepts only ASCII integers from 0 to 5,000, without spaces, signs, separators or redundant leading zeros.

Before resuming effect analysis

Before resuming effect analysis
Suggested checkRecord or result to retain
TimelineDiscrepancy onset, assignment versions, deployments and collection changes.
Stage countsAssigned, exposed and analysed counts; differences explained using the same unit.
IdentitiesEvidence of unit stability and explicit treatment of duplicates, session changes and sign-ins.
TelemetryComparable events, delivery errors and losses by variant, device and version.
FilteringEligibility and exclusion rules, with their position before or after treatment.
DecisionSupported cause, fix, still-usable period or new experiment, owner and review date.

Avoid artificially balancing groups by deleting observations to remove an alert. Reconstruct the data path first. An effect metric, guardrails and uncertainty remain necessary after repairing counts. In the final brief, separate the statistical signal, demonstrated cause and product decision.

Sources, editions and credits

Sources: Microsoft Research, article dated 14 September 2020; NIST/SEMATECH, binomial distribution §1.3.6.6.18. Questions, recipes and eight cases are CIE educational material, not results from real experiments. No institutional chart, logo or visual is reproduced.

Microsoft Research · Diagnosing Sample Ratio Mismatch · Published 2020-09-14 · consulted 2026-10-23

SHA-256 : d28a6a66b3f1d014f3aafce6c0239b6a6477049b2d4582f06f4d6aaae651ee75

NIST/SEMATECH · Binomial distribution · e-Handbook §1.3.6.6.18 · consulted 2026-10-23

SHA-256 : d899609cde11a15ebd745f6313931da10e9511a0dff64f39b027e5b9ad103ad8

הפניות רשמיות

הפניות תומכות בשיטה. התאימו את הבדיקות להקשר שלכם; הן אינן הסמכה. כותרות הפניות ומסמכי המקור המקוריים עשויים להיות בשפה אחרת.

תאריך בדיקת המקורות .